The Authorized Split ac Supplier & Split ac dealer in the UAE
We are leading ac supplier in the UAE we provide complete air conditioning solution from one unit to complex commercial places, we provide split ac engineering, solutions, and installation in the United Arab Emirates. As a certified split ac supplier and premier split ac dealer, with large stock availability and free delivery across the country make us best choice.
1 Ton = 10 Sqm Area
Up to 55°C
Our journey to provide comfortable cooling in the UAE
Operating climate control infrastructure within the United Arab Emirates presents extraordinary thermodynamic challenges. Ambient temperatures during peak summer months regularly exceed 50°C to 55°C, accompanied by intense solar radiation and high relative humidity along coastal regions like Dubai, Abu Dhabi, Sharjah, and Ajman. Under such extreme environmental conditions, standard commercial or temperate-climate air conditioning units experience severe capacity degradation, high head pressures, and premature compressor failure. As an established split ac supplier and authorized split ac dealer, we recognize that selecting and deploying the correct split ac requires deep engineering discipline and certified equipment matching exact serial specifications.
A standard wall-mounted split air conditioning system is fundamentally a vapor-compression refrigeration cycle operating across two primary enclosures: the indoor evaporator unit and the outdoor condensing unit. The thermodynamic efficiency of this closed loop is heavily dependent on the refrigerant’s ability to reject heat into the surrounding ambient air. In temperate climates, condensers are rated for ambient peaks of 35°C to 40°C. However, in the UAE, outdoor air temperatures impose a massive temperature delta across the condenser coils. To overcome this thermal barrier, tropicalized split ac compressors are engineered with larger displacement volumes, enhanced copper coil surface areas, high-ambient T3 compressor ratings, and optimized multi-bend heat exchangers.
Furthermore, the choice of refrigerant plays a pivotal role in operational stability and environmental compliance. Modern high-efficiency split units cataloged across our distribution network predominantly utilize R410A or advanced R32 refrigerants. R410A is a near-azeotropic fluorocarbon blend that exhibits zero ozone depletion potential and superior volumetric cooling capacity, allowing smaller compressor displacements to achieve greater heat absorption. As a trusted split ac supplier, we ensure that every unit supplied to our clients across the Emirates is fully certified for T3 tropical climate conditions, guaranteeing continuous, uncompromised cooling performance even when the external environment is operating at its thermal maximum.
Interactive Split AC BTU & Tonnage Calculator
Accurate cooling capacity calculation is the cornerstone of effective HVAC design. In accordance with strict UAE engineering standards for tropical thermal loads, our calculation rule is standardized as per the UAE weather condition for further details please contact our engineering teams
Enter Room Dimensions
Recommended Split AC Capacity
Master Split AC Equipment Catalog & Technical Specifications Database
Comprehensive breakdown of exact model numbers and serial specifications derived directly from our official technical catalogs: R410 Catalog, MS/GS Series Catalog, and Premium Inverter Catalog.
| Catalog Source | Indoor Model / Serial No. | Outdoor Model / Serial No. | Brand / Series | Type | Pipe Size (Gas / Liquid) |
|---|---|---|---|---|---|
| catalog-Split-R410.pdf | RAS-10YKC | RAC-10YKC | Hitachi / R410 Series | Non-Inverter | 3/8″ & 1/4″ |
| catalog-Split-R410.pdf | RAS-14YKC | RAC-14YKC | Hitachi / R410 Series | Non-Inverter | 1/2″ & 1/4″ |
| catalog-Split-R410.pdf | RAS-18YKC | RAC-18YKC | Hitachi / R410 Series | Non-Inverter | 1/2″ & 1/4″ |
| catalog-Split-R410.pdf | RAS-24YKC | RAC-24YKC | Hitachi / R410 Series | Non-Inverter | 5/8″ & 3/8″ |
| Catalogue-for-MS-GS-Series.pdf | MS-09HRN | MU-09HN | Midea / GS Series | Non-Inverter | 3/8″ & 1/4″ |
| Catalogue-for-MS-GS-Series.pdf | MS-12HRN | MU-12HN | Midea / GS Series | Non-Inverter | 1/2″ & 1/4″ |
| Catalogue-for-MS-GS-Series.pdf | GS-18CRN | GU-18CN | Midea / GS Series | Non-Inverter | 1/2″ & 1/4″ |
| Catalogue-for-MS-GS-Series.pdf | GS-24CRN | GU-24CN | Midea / GS Series | Non-Inverter | 5/8″ & 3/8″ |
| catalog-split-premium-inverter.pdf | ASGA09CPTA | AOYG09CPTA | O General Premium | DC Inverter | 3/8″ & 1/4″ |
| catalog-split-premium-inverter.pdf | ASGA12CPTA | AOYG12CPTA | O General Premium | DC Inverter | 3/8″ & 1/4″ |
| catalog-split-premium-inverter.pdf | ASGA18CPTA | AOYG18CPTA | O General Premium | DC Inverter | 1/2″ & 1/4″ |
| catalog-split-premium-inverter.pdf | ASGA24CPTA | AOYG24CPTA | O General Premium | DC Inverter | 5/8″ & 3/8″ |
In-Depth Engineering Analysis: DC Inverter vs. Non-Inverter Split AC Systems
When selecting a split ac system for properties in Dubai, Abu Dhabi, Sharjah, or Ajman, understanding the fundamental differences between compressor technologies is essential for optimizing electrical consumption and indoor comfort. As a leading split ac supplier and authorized split ac dealer, we provide both advanced DC inverter models (such as the O General ASGA09CPTA / AOYG09CPTA and ASGA24CPTA / AOYG24CPTA series) and robust non-inverter units (such as the Midea MS-09HRN / MU-09HN and Hitachi RAS-24YKC / RAC-24YKC series) to cater to diverse architectural and financial requirements.
Non-Inverter Systems (Fixed Speed): Traditional non-inverter air conditioners operate on a fixed-speed binary cycle—the compressor runs at 100% capacity until the desired room temperature is achieved, and then shuts off completely. When the room temperature rises, the thermostat triggers the compressor to restart at full capacity. This constant starting surge draws high electrical current, creates noticeable temperature fluctuations, and places mechanical stress on motor windings. However, non-inverter units are exceptionally durable, feature simplified electronic control boards, and are highly resistant to power voltage fluctuations common in heavy industrial zones.
DC Inverter Systems (Variable Speed): Inverter technology utilizes a variable-frequency drive to control the speed of the compressor motor, continuously modulating cooling output to match real-time thermal loads. Instead of turning on and off, an inverter compressor slows down or speeds up smoothly. In the UAE climate, where air conditioners operate for extended hours, DC inverter systems deliver superior energy savings of up to 30% to 50% compared to fixed-speed units. They maintain ultra-stable room temperatures, eliminate start-up current spikes, and operate with whisper-quiet indoor sound levels, making them the preferred choice for modern luxury villas and executive offices.
Refrigerant Piping, Sizing Standards & Professional Installation Protocols
The operational longevity and cooling efficiency of any split ac installation depend heavily on the correct sizing and installation of copper refrigerant lines. As highlighted in our master catalog, refrigerant pipe diameters vary according to system capacity—ranging from 1/4″ liquid lines and 3/8″ gas lines for models like ASGA09CPTA and MS-09HRN, up to 3/8″ liquid lines and 5/8″ gas lines for 24,000 BTU systems such as RAS-24YKC and ASGA24CPTA. Using incorrect pipe diameters disrupts refrigerant mass flow velocity, leads to improper oil return to the compressor crankcase, and results in severe efficiency losses.
Professional installation executed by a certified split ac dealer involves a rigorous 5-step engineering protocol:
- Precise Site Survey & Load Estimation: Calculating exact thermal loads based on room orientation, window glazing, and occupancy, adhering strictly to the 1 Ton per 10 sqm standard.
- Insulated Copper Line Routing: Laying seamless ASTM B283 copper tubing encased in high-density closed-cell elastomeric insulation to prevent condensation and thermal gain.
- Secure Mechanical Mounting: Anchoring indoor chassis units on vibration-free mounting plates and positioning outdoor condensing units on sturdy brackets with rubber vibration isolators.
- Nitrogen Pressure Testing & Vacuum Dehydration: Pressurizing the sealed system with dry nitrogen up to 450 PSI to inspect joint integrity, followed by deep micron vacuum evacuation to eliminate moisture and non-condensable gases.
- Commissioning & Refrigerant Charge Verification: Opening service valves, measuring superheat and subcooling parameters, and verifying operational amperage against manufacturer specifications.
Regional HVAC Supply & Dealer Coverage Across Dubai, Abu Dhabi, Sharjah & Ajman
As an established commercial HVAC enterprise operating across the United Arab Emirates, our logistical and technical footprint spans every major emirate. Whether you are managing a residential refurbishment in Dubai, a commercial office fit-out in Abu Dhabi, a warehouse installation in Sharjah, or a residential villa project in Ajman, our status as a trusted split ac supplier ensures rapid equipment dispatch and expert technical execution using exact catalog models.
Properties located near coastal sectors such as Dubai Marina, Jumeirah, and Saadiyat Island in Abu Dhabi are subjected to severe saline humidity and airborne moisture, which accelerates metallic corrosion on outdoor condensing coils. To counter this, every split ac unit distributed through our dealership network features advanced anti-corrosion golden-fin or blue-fin condenser coatings, UV-resistant ABS plastic indoor casings, and weather-treated galvanized steel chassis protection.
We collaborate closely with property developers, MEP contractors, interior designers, and individual homeowners to deliver turnkey air conditioning solutions. From initial technical consultation and model selection based on our strict 1 Ton per 10 sqm sizing rule to final commissioning and annual maintenance contracts (AMCs), our dedicated support teams are available 24/7 to guarantee uninterrupted indoor comfort across the UAE.
Frequently Asked Questions About Split AC Systems in UAE
Detailed answers regarding split AC supply, warranty, dealer networks, and installation services across Dubai, Abu Dhabi, Sharjah, and Ajman.
Are you an authorized split ac dealer and supplier in Dubai?
Yes, we are an official authorized split ac supplier and split ac dealer operating across Dubai, Abu Dhabi, Sharjah, and Ajman. We provide 100% genuine units with exact catalog serial numbers accompanied by official manufacturer warranties and certified installation.
What is the standard sizing ratio used for split AC cooling capacity?
We strictly follow the UAE tropical climate standard of 1 Ton of refrigeration (12,000 BTU/h) for every 10 square meters (10 sqm) of room area, adjusted for thermal exposure factors such as top-floor solar gain and glass glazing.
What pipe sizes are required for standard split AC installation?
Pipe sizes depend on unit tonnage: 9K-12K BTU models (such as ASGA09CPTA and MS-09HRN) use 1/4″ liquid and 3/8″ gas lines, while 24K BTU units (such as RAS-24YKC and ASGA24CPTA) utilize 3/8″ liquid and 5/8″ gas lines as specified in our master technical catalog.
Do you provide split AC installation and support across Abu Dhabi and Sharjah?
Absolutely. Our certified HVAC engineering teams provide complete supply, refrigerant pipe laying, and professional installation services throughout the UAE including Dubai, Abu Dhabi, Sharjah, Ajman, and surrounding emirates.
Ready to Install Your Split AC System?
Contact our expert engineers in Dubai, Abu Dhabi, Sharjah, and Ajman for official catalog quotes, site surveys, split AC supply, or professional installation services.